From our project reports · June 2013
This is an exterior painting project we documented in the Redmond–Fall City area. The photos and day-by-day notes below follow the work from washing and priming through new window trim and two finish coats.
This house belonged to longtime clients. We had painted the interior about six years before this job and refinished the decks in 2009. In June 2013, we came back for the exterior. The siding had previously been stained; this project changed it to a painted finish and added trim around the windows.
Power washing
Power washing was completed on June 3, 2013. We were able to remove a large number of bee’s nests and massive spider webs. We also removed any of the previous stain that was in poor shape. Luckily we were able to accomplish this task without any water going inside the house through any of the doors or windows.
Our next scheduled step was June 13, 2013: protect the windows, roof, decks, patios, and driveway, then prime the exterior. For this job, we used an oil-based exterior primer on the previously stained wood.
The plan also included new window trim using 1×4 pre-primed spruce. After installation, we filled the nail holes and caulked the trim edges. This was part of the preparation, before the finish coats.

Possible color choices
The homeowners were considering shades of gray. We applied several Benjamin Moore samples so they could look at them for a few days, in different light and at different times of day. The finished photos show the gray they selected; the exact color name isn’t recorded in this report.
Day 1: Preparation
By the end of our first day, we managed to mask all windows, mask roof, front porch, and deck, and apply a coat of oil based primer to about 70% of the house.

Priming complete! Since this beautiful house has never been painted before, we applied one solid coat of oil based primer on every square inch of the siding and eaves.

We take covering up seriously. A good paint job loses its value if there are drops of paint on the plants, decks, or patios. These photos show the protection used during priming.

An archived worksite photo from the 2013 project. The windows and surrounding surfaces were protected during preparation.
Day 2: Rain and window trim
By the end of day #2, we managed to install trim on about 70% of the windows, and unmask front windows. The rain finally stopped by the end of the day, allowing us to finish priming the siding :)

Caulking
On this project, we did the caulking after the primer had dried. We worked through the siding and trim, filling appropriate cracks and gaps before painting. Our original notes record that we left the siding butt joints uncaulked. For more about how we decide what to seal, see our caulking siding page.

Day 3: More rain
Window trim Installation is complete and colors have been selected. 100% chance of rain tomorrow….We cleaned up well knowing we will be rained out tomorrow and are now hoping to complete most of the painting on Friday and Saturday.
Day 4: Painting
We finally had some nice weather and made some great progress. We now expect to finish this project on Monday June 24th. Plan for Saturday: finish the house. Plan for Monday: Finish doors and deck.
Back-rolling
We sprayed the paint, then worked it into the textured siding with a roller while it was still wet. The photos show the difference in coverage. Where the roller couldn’t reach, we used a brush. We back-rolled both finish coats on this house.
Second Coat
We applied two finish coats and back-rolled both. The photos below show the painted siding and new window trim.

Planning an exterior repaint? See our Redmond painting services or request an estimate.
Elegant Painting® • Serving the Eastside since 2005







